1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns A wide array of value-engineered

A wide array of value-engineered hole patterns are available that will accommodate different load levels while minimizing installed cost

SawTooth™ Point – Fast starts and smooth driving without the need to pre-drill

The embedded anchors of the DETAL are preattached to the moisture barrier through slots that allow some adjustment during installation to avoid rebar

Available Finishes: Choose between mechanically galvanized (N2000®) for corrosion protection or black phosphate for dry

162" x 2 1/2" nails into the header and 0

1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns A wide array of value-engineeredWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".