Proximity Sensor - 3 mm Diameter, Shielded, Normally Closed - NPN Wintriss Repair Parts Significantly lower cost than comparable

Significantly lower cost than comparable devices

with Amplifier Unit in NORM mode Ambient temperature range Operating:-10 to 55°C

Marking on the relay: G3R-0DX02SN

Load short-circuit protection Ambient temperature range Operation and storage: -25 to 60 degrees C (with no icing or condensation) Ambient humidity range Operation and storage: 35% to 95%  Temperature influence - 15% to +25% max

You can also use the standard sensor connector to connect to the front panel of the Wintriss DSI 2

Proximity Sensor - 3 mm Diameter, Shielded, Normally Closed - NPN Wintriss Repair Parts Significantly lower cost than comparableWintriss offers this 3mm diameter shielded proximity sensor as a useful sensor for detecting small features, especially when space inside the die is at a premium. This sensor has an unthreaded housing and should be epoxied into a slip fit hole. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bush or insert. This inductive proximity sensor is Normally Closed; it actuates (turns On) when metal leaves the sensing